Copper, fuel, tools and equipment walk off US job sites after hours, and the cameras that would catch it need power the site does not have yet. HoundLight runs on its own panel over 4G, mounts to the fence or the site trailer, and calls your phone when someone is on site.
Not rated for classified hazardous locations — mounted at gates, fence lines and yards outside classified areas.
The exposure
Theft on a construction site is rarely dramatic. It is a truck at the gate at 2am, a pallet of copper that was there on Friday, or a fuel tank that is suddenly half empty. It happens between shifts, on weekends, and during the weeks when the site is framed but nobody is there overnight.
The usual targets are the things that are easy to carry and easy to sell: copper wire and fittings, fuel, small tools and plant attachments, and equipment left near the gate because that is where it gets used.
At 2am
Detection is only half of it. The value is what happens in the first thirty seconds — before someone has loaded a truck or cut a lock.
When a person is detected, the unit turns on its lights, gives a spoken warning to leave, and sends the clip to your phone. It is loud, visible and immediate, which is what actually makes people leave.
Not a rip and replace
If the site office, the hoist or the permanent building already has ONVIF cameras, Scopis AI puts detection on top of them — no new hardware, no new NVR.
That is where construction-specific intelligence comes in: PPE detection, fall detection, danger-zone entry and vehicle-pedestrian proximity, all from the same dashboards your team already uses.
Most job sites end up mixing these. The question is how much of the coverage you can put on a fixed, predictable cost.
| Manned guard | Camera trailer | HoundLight | |
|---|---|---|---|
| Overnight coverage | Paid by the shift, and only when someone is posted | Continuous, but one fixed view from wherever it is parked | Detects and warns every time someone enters, night after night |
| Time to get on site | Days to schedule a guard | Delivery and setup by the supplier | Mounted by one person in about an hour |
| Power needed | None | Solar and battery | Solar and battery — no mains, no Wi-Fi |
| When the site moves | Guard moves with it | Needs a truck | Unbolt, carry, remount |
| Evidence you keep | A written log | Recordings, sometimes user-managed | Clip of the event in your app, plus plate logs at the gate |
No. Each unit has its own solar panel, battery and SIM, so it works on a site with no temporary power and no Wi-Fi. Cellular bands and coverage are checked before deployment.
Fence posts, scaffolding, poles, shipping containers and site trailers are all common. It is mounted high enough to see the gate or yard, and it takes one person about an hour.
Whoever you nominate — superintendent, project manager, night contact. Several people can receive the same alert at once, and you can set different recipients for different sites or shifts.
The unit still warns the person off and records the event. If you want a person responding in real time, add 24/7 operator monitoring and a trained operator checks actionable events and escalates to your keyholders.
Yes. That is the main reason sites use it instead of a trailer: when the gate moves or the laydown yard relocates, the unit unbolts and goes with it.
Mounting, climate and detection range are scoped for your site before deployment, and battery shipping and certifications are handled at fulfilment. Tell us the state and the season and we will confirm what the unit needs there.
Send us the site layout and where the gates are. We will come back with how many units it takes and what it costs to have them live.